EASUN POWER 6200W 48V Hybrid Inverter 100A MPPT Support Parallel with WIFI

It is best suited for residential solar storage, daily household power support, off-grid or semi-off-grid use, and emergency backup for essential loads. It is a practical choice for small-to-medium home systems, cabins, small villas, and users who want solar self-consumption with battery storage.

It can support common household loads such as lighting, router, refrigerator, TV, computer, washing machine, fan, and other everyday appliances. The actual result depends on the total running power and startup surge of the connected devices, so high-surge appliances should be checked before being used together.

If the system stores and uses about 5kWh of energy per day, it can cycle approximately 1,825kWh per year for household use. This can significantly reduce grid electricity use for daily loads. Actual savings depend on local sunlight, electricity price, battery usage pattern, and household consumption.

The inverter supports multiple output priority modes. PV Priority uses solar first and switches to mains when solar is unavailable or battery voltage is too low. Grid Priority gives mains power priority and switches to inverter output when mains fails. Battery Priority uses battery power first and switches to mains based on battery protection settings. Hybrid Mode can be configured through the related setting item for balanced system use.

Yes. The typical transfer time between bypass and inverter mode is 10ms. When grid power fails or becomes unstable, the inverter can quickly switch to backup mode, helping key devices such as lighting, router, refrigerator, computer, and TV remain powered. For extremely sensitive equipment, the final result also depends on the device tolerance and system wiring.

Yes. It supports BMS communication with compatible lithium batteries, allowing the inverter and battery to coordinate charging, discharging, and protection more intelligently. This helps improve daily operation and battery management compared with basic voltage-only control.

Supported BMS protocol options include VOL / Voltronic, PLN / Pylontech V1.2, AOG / Aoguan, OLT / Oulite, GXU / Gotion, XWD / Sunwoda, CFE / CF, DAQ / Dyness, PCE / Pace, BST, MIT / FoxESS, ACE / AEC, PL3 / Pylontech V3.5, MeI / MeZic, and TNT / Tentek. Compatibility may still depend on the exact battery model, firmware, and communication settings.

Automatic lithium battery activation means the inverter can help wake compatible lithium batteries from low-voltage protection or sleep status through PV or utility input. This can make system startup and battery recovery more convenient during installation or after deep discharge protection.

For the SGR 6.2KP-Wifi, the maximum PV input power is 6500W, the maximum PV open circuit voltage is 500Vdc, the PV operating voltage range is 90–500Vdc, the MPPT voltage range is 90–450Vdc, and the maximum PV input current is 27A. Solar panels should be configured within these voltage and current limits.

Yes. The inverter supports both lead-acid and lithium batteries. For lithium batteries, using BMS communication is recommended when the battery protocol is compatible, because it allows more intelligent battery status exchange and protection coordination.

Yes. The permitted parallel number is 1–6 units. Parallel installation should use compatible units and follow the correct wiring, communication, and parameter settings in the manual. This is useful when users want a larger system in the future.

The inverter supports USB, RS485, WiFi, GPRS, and dry node control. WiFi monitoring helps users check system status more conveniently, while RS485 is commonly used for battery communication and system integration.

The inverter includes protection for overload, short circuit, battery abnormality, over-temperature, PV reverse polarity, and other system faults. Some temporary faults can recover after conditions return to a safe range, helping improve long-term reliability and reduce unnecessary manual intervention.